Here is the new firmware for the X5105.
The menu functions include in zip file
- X5105 V3 Menu structure a.docx
- X5105 V3 Menu structure and Operation instructions.pdf
NOTICE When the firmware is installed and you first power on you will get a error failure message on the display..press any button to clear it and it will come on. It’s just an initialise warningX5105_App_V3.00
Firmware update instructions
1. Fixed a bug in SPLT exception in CW mode of X5105_FW_V1_0_06_build001_beta08 version;
2. Reconfigure the audio baseband unit to enhance the sense of hearing;
1. After finishing the firmware of this version, please initialize it according to the previous method;
2. After the initialization is completed, enter the system menu and perform the reset operation;
3. After the reset is completed, calibrate the S table as shown below:
For the S table calibration method, see the document “X5105 New Firmware S Table Calibration Method CZ-180901″.
X5105 Firmware Update v1.0.03 build 055
X5105_FW_V1_0_03_build055.xgf – Firmware Update description
1. Before updating the firmware, please read the update tutorial carefully;
2. After operating, old parameters will be lost, so we must refer to the X5105 system configuration table to re-setting all parameters, then saving and power off and on again.
Firmware Update description
1.The upgrade is based on the 050 version.
2. Improved internal switching power supply synchronization system, reducing the switching power supply interference.
3. Improved the side-tone output, the sense of hearing more gentle.
4. Optimized the configuration of the frequency synthesizer.