PA500 linear amplifier

PA500 linear amplifier …it is made for HAMs by HAMs

Automatic band selection compatible to most Transceivers CAT/ACC Interface support

PA500 linear amplifier tailored for adventures and extremes signatured aluminum unibody robust outstanding quality

performance

covers most HAM SW Bands RF Power up to 80W integrated automatic tuner

PA500 linear amplifier

unique form-factor

we really like the Discovery TX-500 Transceiver from Lab599. The PA500 is basicly made for the TX-500 but it will work nicly with other Radios as well. The thickness of the PA500 is just 30mm and allows you to operate from anywhere you like.

RF Low pass filters

the PA500 has separate low pass filter banks for the specific band regions. RF Filters made with superior ferrite toroidal cores and precision high voltage glimmer capacitors. The harmonic distortion suppression are >43dB below the carrier signal depends on the selected frequency band.

Robust aluminum unibody design

The PA500 body is made of CNC milled durable anodized aluminum, made for extreme operation, perfect for contest work on the go.

integrated automatic antenna tuner

the PA500 has an integrated automatic antanna tuner for most of the operating frequencies to tune a suitable antenna between the 80m and 10m band.

PA500 linear amplifier quickstart guide connectors

PA500 linear amplifier

 

PA500 linear amplifier Specifications

PA500-40

  • Up to 40W RF Power
    depends on the mode and operating frequency
  • max. input drive level: 5W (10W tolerant for 10sec.)
  • 80 – 10m HAM bands
  • All modes: SSB, CW, AM*, FM*, DIG*
  • current drain up to 8A@13.8V
  • Ultra-compact size (HWD):
    30mm * 207mm * 90m (incl. heatsink)
  • Weight: 0.9Kg
  • Harmonic / Spurious Outputs > 50dB below carrier
  • ACC/CAT Interface support
  • tuning impedance 25-250 Ohms (e.g. 80m)
  • 6×5 L-match type tuning network

*reduced power

PA500-80

  • Up to 80W RF Power
    depends on the mode and operating frequency
  • max. input drive level: 5W (10W tolerant for 10sec.)
  • 80 – 10m HAM bands
  • All modes: SSB, CW, AM*, FM*, DIG*
  • current drain up to 12A@13.8V
  • Ultra-compact size (HWD):
    30mm * 207mm * 90m (incl. heatsink)
  • Weight: 0.9Kg
  • Harmonic / Spurious Outputs > 50dB below carrier
  • ACC/CAT Interface support
  • tuning impedance 25-250 Ohms (e.g.80m)
  • 6×5 L-match type tuning network

*reduced power

PA500 linear amplifier
quickstart guide here: QUICK_START_GUIDE

It's only fair to share...Tweet about this on Twitter
Twitter
Share on Facebook
Facebook
Share on Reddit
Reddit
Share on LinkedIn
Linkedin
error: