MSi SDR Panadapter

MSi SDR Panadapter

The best SDR panadapter

Panadapter panoramic spectrum module package

The main function of this Panadapter, is to convert a variety of different types of intermediate frequency signal into a radio station USB bus into the PC’s USB port, and then do the treatment by HDSDR software. Display spectrum demodulation signals, may be processed by other software.

The price will be similar to a CW filter price, after conversion into HDSDR software Panadapter, additional functionality can be achieved far more than the CW filter software. Spectrum may be displayed on the computer, any set reception bandwidth, signal recording, save, of course, include playback functions can be arbitrarily set a bandwidth of the filter function.

Panadapter is a panoramic spectrum display can be connected to your radio, so you can view your radio station received the entire band (up to 10MHz) spectrum. Combining it with the basic CAT controller, can form a powerful tool that allows real-time discovery of multiple signal spectrum, click on any of the signal, your radio will automatically switch to the frequency immediately.

If you are very envious of IC-756PRO, IC-7800 high-end radio spectrum search function, DSP, signal recording preservation function. Then it is an honor you will hear good news. By Panadapter convert your existing radio IF signal into a USB device connected to your PC, and basic functions described above can be achieved through PC software. It feels like an external IC-756PRO a big-screen LCD display.

Panadapter can adapt to any radio IF frequency is set by software.

BA5SBA MSi SDR Panadapter

You can install it yourself, without having to modify your radio equipment. Simply distribution cable to the radio station specified in the location. It is also easy to remove . (You need basic skills and the ability to dismantling stations with soldering iron)

Features:

  • Refined and rugged aluminum housing
  • Continuously covers 10kHz to 2GHz frequency
  • 12-bit ADC chip (not the kind of chip RTL)
  • Built front-end filter
  • Built-in 0.5 ppm TCXO
  • The maximum 10Mhz of spectrum bandwidth
  • Higher sensitivity and good selectivity
  • More often low background noise
  • Simple USB interface (micor socket)
  • SMA antenna connector
  • USB powered No separate power supply unit
  • SDRPlay RSP1 compatible with all software.

System requirements:

Microsoft Windows 7, 8, or 10

Package:

  • Panadapter host the x1
  • micor the USB cable (1.2M) x1
  • with Teflon SMA connector cable (45cm) x1
  • bis SMA coaxial cable jumper (60cm) x1
  • magnetic x2

BA5SBA MSi SDR Panadapter

 

IF extraction method instructions

ICOM

  • The 1st IF frequency of IC-706MK2G is 69.010MHz.
  • IC-725’s 1st IF frequency is 70.45MHz.
  • IC-728’s 1st IF frequency is 70.45MHz IC-728 IC-729 can refer to IC-725’s lead 1st IF out
  • IC-735’s 1st IF frequency is 70.45MHz.
  • ICOM7000’s 1st IF frequency is 124.487MHz.
  • The IC-7200’s 1st IF frequency is 64.455MHz.
  • The 1st IF frequency of the IC725A is 64.455MHz.
  • Ist703’s 1st IF frequency is 64.455MHz.
  • The 1st IF frequency of IC-718 and ic-78 is 64.455MHz.
  • The 1st IF frequency of IC-R71 is 70.4515MHz.
  • IC’751A’s 1st IF frequency is 70.4515MHz.
  • IC-756pro3’s 1st IF frequency is 64.455MHz.
  • IC-7600’s 1st IF frequency is 64.455MHz.
  • IC-7410’s 1st IF frequency is 64.455MHz.
  • The 1-st IF frequency of IC-746 is 69.0115MHz.
  • The IC-7100’s 1st IF frequency is 124.487MHz.

YAESU

  • The 1st IF frequency of the FT-450 is 67.899 MHz.
  • The 1st IF frequency of the FT-747 (FT-80C) is 47.055 MHz.
  • FT-757GX 1st IF out 47.060 MHZ
  • The 1st IF frequency of the FT-817ND is 68.330 MHz.
  • The 1st IF frequency of the FT-857D is 68.330 MHz with reference to the FT897
  • The 1st IF frequency of the FT-897 is 68.330MHz.
  • The 1st IF frequency of the FT-920 is 68.985 MHz.
  • FT-1000D 1st IF 73.62MHz
  • FT-1000MP 1st IF 70.455MHz
  • The 1st IF frequency of the FT-2000 is 69.450 MHz.
  • The 1st IF frequency of the FT-950 is 69.450 MHz
  • The 1st IF frequency of the FT-DX5000 is 9MHz.

KENWOOD

  • The TS-590’s 1st IF frequency is 73.095MHz.
  • The TS-480’s 1st IF frequency is 73.095MHz.
  • The TS-430’s 1st IF frequency is 48.055MHz
  • The TS50’s 1st IF frequency is 73.045MHz.
  • The 1st IF frequency of the TK-80 is 73.045MHz
  • The 1st IF frequency of ts-450s/690s is 73.05MHz.

Misc.

  • JRC 245/145 1st IF 70.455MHz
  • Raytheon 152 JRC176 1st IF 70.455MHz
  • The IF frequency of the AOR AR3000a is 45.025MHz.

BA5SBA MSi SDR Panadapter

Panadapter panoramic spectrum module package

Price: US $42.00

MSI.SDR 10kHz To 2GHz Panadapter SDR Receiver Compatible SDRPlay RSP1 TCXO 0.5ppm

It's only fair to share...Tweet about this on Twitter
Twitter
Share on Facebook
Facebook
Share on Reddit
Reddit
Share on LinkedIn
Linkedin
error: