MIDLAND CT990

MIDLAND CT990

10W Dual Band Amateur C1339

 

Main features

•    Dual band (VHF/UHF) displayed

•    Frequency band (to set according to country/area of use): 144-146 MHz & 430-440MHz (Rx / Tx).

•    Working mode: UHF-VHF, VHF-VHF or UHF-UHF

•    Ultra high output power: 10W VHF / UHFMIDLAND CT990 - 10W Dual Band Amateur C1339

•    IP67 certified

•    High performance antenna

•    Ultra clear voice

•    Dead Man function

•    DQT function (private conversations)

•    257 memory channels

•    Wide colorful LCD display

•    Li-Ion battery pack 2800mAh

•    Repeater tones

•    Individual/group selective calls

•    Side tone: end transmission noise muffler

•    VOX function

•    83 + 83 DCS codes and 38 CTCSS tones

•    Voice annoucement “VOICE”

•    Selectable channel spacing 25kHz/12,5 kHz

•    Channel number, channel number+frequency, channel name displayed

•    Reverse frequency

•    Scan

•    FM radio

•    Frequency step: 0.5Khz, 2.5KHz, 5 kHz, 6.25 kHz, 10 kHz, 12.5 kHz, 25 kHz, 37.5KHz, 50 kHz or 100kHz

•    Selectable output power: high (10W) or low (5W)

•    Frequency offset

•    Shift repeater

•    ”Busy channel lock out” function

•    Output power level indicator on the display

•    Low battery voice indicator

•    Roger Beep

•    TOT (time out timer)

•    Keypad lock

•    Function/channel reset

 

Main controls and parts of the radio

Radio buttons

MIDLAND CT99010W Dual Band Amateur C1339

1.    Antenna

2.    Encoder: rotate it to select the desired channel

3.    Power / Switch / Volume control: Rotate to turn on/off CT990 and to adjust the volume

4.    Led: transmission (red) / reception (green)

5.    LCD Display

6.    Microphone

7.    < Back: press to exit the Menu and functions. A/B (appears on the display): push to select the desired frequency (VHF or UHF) in the main or secondary display.

8.    VFO/MR: push to switch from channel to frequency mode or viceversa.

9.    */fl: press for 2 seconds to lock the keypad

10.    Alphanumerical keypad

11.    ▲/▼ keys: push to select functions / Menu

12.    Menu: press to enter the Menu functions and to confirm your selections.

13.    Side-key CALL: Selective call/Transmission on the secondary frequency. This control is useful to send out the selective call or the 1750 Hz repeater tone.

14.    PTT

15.    Side key MON: Keep pressed to activate the Monitor feature .

16.    Holes for the belt clip

17.    MIC/SP: external speaker/mike jack 2 Pin Kenwood.

18.    2800mAh Li-Ion battery

Technical specifications

Frequency bands 144-146MHz & 430-440MHz (Rx / Tx)
Memory channels 257
Power supply Li-Ion battery pack 7.4V/2800 mAh
Operating temperature -25°C to + 55°C
Working mode monoband/dualband
Output power 10W VHF/ UHF
Modulation F3E(FM)
Max frequency deviation <±5KHz
Spurious emissions <-60dB
Frequency stability ±2.5 ppm
Rx sensitivity < 0.2uV
Audio output power > 500mW
Dimensions 140 x 60 x 35mm
Weight 310g

Specifications are subject to change without notice.

WARNING: Direct plug-in ac/dc power supply must be used for disconnecting the transceiver from the mains; the desktop charger must be positioned close to the unit and easily accessible.

139.00 € VAT included

It's only fair to share...Tweet about this on Twitter
Twitter
Share on Facebook
Facebook
Share on Reddit
Reddit
Share on LinkedIn
Linkedin
error: