100W SSB/CW HF Transceiver (80m, 40m, 30m, 20m) HBR4HFX
HBR4HFX v2.0 is another 4-banders with small size desktop transceiver and big power. A large display using a 3.2″ Color TFT LCD will indulge your eyes when you do QSO.
Adjustable power out from QRP level up to 100W will take you to explore the world of HF to the fullest. This radio now has a built-in mic compressor, no need to speak aloud in front of the microphone. TCXO (temperature compensate Xtal Oscillator) used as source frequency for the digital synthesizer to provide minimal frequency drift cause of temperature.
HBR4HFX v2.0 is here to answer your needs, large display, great power out with the very low-cost price, simple to operate, and easy to maintain.
HBR4HFX v2.0 Specification
Frequency Coverage (programmable) :
- 80m (3.500.000 – 3.999.990)
- 40m (6.900.000 – 7.499.990)
- 30m (10.100.000 – 11.449.990)
- 20m (14.000.000 – 14.349.990)
- Tunning step : 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz (rotary dial push)
*. Display : 3.2 Inch 320×240 pixel TFT
*. Dimension : 90mm (height) x 220mm (wide) x 130mm (deep)
*. Controller : ATMega128
*. Main mixer : ADE-1 mixer
*. IF Frequency : 8.000000 MHz
*. Synthesizer : Si5351 with TCXO source clock
*. Selectivity : 4 pole crystal ladder filter (3Khz nominal bandwidth)
*. Power out : at 13.8V 100W at 80m, 90W at 40m, 60W at 30m, 30W at 20m
*. Adjustable RX gain setting with MMIC MSA series front end amplifier up to 0.1uV sensitivity
*. Adjustable TX gain setting (adjustable power out 0-100W)
*. Adjustable AF gain setting
*. Adjustable Mic gain setting witj built in low noise mic compressor based on IC MAX9814
*. Adjustable IF Shift, RIT, XIT
*. 2 x IRFP150 final transistor
*. CW sharing filter with SSB
*. Iambic keyer with programmable WPM or straight key (set 0 WPM) option setting
*. PSU Voltage 13.8 V (12-13.8 V)
*. RX current consumption : 380 – 385 mA (Vcc 13.8 V)
*. TX current consumption : 80m 15 A, 40m 15 A, 30m 13A, 20m 10 A (Vcc 13.8 V)
*. 2 Watt, Speaker out
*. 12 functional button
*. does not support CW QSK
The package you will get:
- HBR4HFX unit with fully assembled and ready to use (1)
- DC chord (1)
- Condenser Microphone (1)
** Shipped assembled, pre-programmed, fully tested, and working properly.
** Purchasing this Product means being prepared to comply with the applicable requirements & policies.
** This is a home-brew Product and is designated for personal use only.
** Adequate knowledge in radio electronics is required in using this Product.
** Hambuilder is not liable for any damage or error caused by the user’s failed experiments and/or learning process.
** Our workshop is in Indonesia, handling time for our order processing and testing takes 15 working days.
Sending packages using Express Packet from Indonesian Courir KURASI – DHL eCommerce and the delivery time around 7-10 days. If you cannot accept this condition please do not buy this product or you can discuss it with us.
Please contact our team via message inbox or via email to: firstname.lastname@example.org
About Feedback :
Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your purchase. These original Hambuilder products are made in Indonesia.
If the product is defective or damaged upon arrival or the wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by the buyer.
Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
We appreciate your Positive Feedback and will do the same in return. DO NOT leave negative feedback without first communicating with us. Please allow max 2 business days for us to respond.
Kindly Regards From All Of Us,