xiegu x5105 FCC Certification
xiegu x5105 FCC Certification
09 October 2017
Federal Communications Commission Authorization and Evaluation Division,
- Product Name: HF+50MHz transceiver
- Model Number: X5105
The scanner receiver equipment meets the requirements of the FCC Rules, 15.121(a). Compliance is achieved through the following methods:
The scanner receiver in this equipment is incapable of tuning, or readily being altered, by the User to operate within the frequency bands allocated to the Domestic Public Cellular Telecommunications Service in Part 22. Blocking of the cellular frequencies is implemented in the firmware of the unit’s main control central processing unit (CPU). Coverage of 824 * 849 MHz and 869 – 894 MHz is completely blocked, since it is done in the microprocessor, and cannot be re-enabled by any user-accessible procedure, including diode, resistor, or jumper changes, nor by connection of any external device such as a personal computer, nor by installation of any “special” enabling semiconductor device.
The scanning receiver is designed so that the tuning, control and filtering circuitry is inaccessible.
Manufacturer’s Name……….: Shenzhen Xiegu Telecommunication Co.,Ltd.
GENERAL DESCRIPTION
Equipment: HF+50MHz transceiver
Model Name: X5105
Connecting I/O port:
DC in, Antenna interface, External speaker / earphone interface, DC power interface, ACC interface, KEY interface, ATU interface, COM interface, MIC interface, IF signal output port
Operation Frequency: receive: 1MHz-55MHz
Modulation Type: SSB, AM, FM, CW
Power Source DC13.8V±15% V
Battery DC12V/3800mAh
Manufacturer’s X5105 Specifications
Basic Specifications
Frequency range:
- Receive: 1MHz-55MHz
- Transmitting: 160 meters -6 meters (Amateur band only)
Operating mode: A1A(CW) , A3E(AM) , J3E(USB/LSB) , F3E(FM)
minimum frequency stepping: 1Hz
Antenna impedance: 50Ω
Operating temperature range: -10°C ~ +60°C
Frequency stability: after turn on the radio 1-60 minutes is ± 2ppm, @25C : 1ppm/hour
supply voltage: normal: 13.8VDC + 15%, negative grounding Operating voltage: 9.0-15.0VDC, negative grounding Current consumption: receive: 660mA@ Max transmit: 2.5A@ Max Battery capacity: 3800mAh @12V
Dimensions: 160*100*46mm [does not include protrusion]
Weight: 0.94Kg [host only]
Transmitter parameters
Transmitter power : 5W(SSB/CW/FM) , 1.5W(AM carrier) , @13.8VDC
Modulation mode: SSB balanced modulation/AM low level amplitude modulation/FM
Variable reactance frequency modulation
FM Maximum frequency swing: ±5kHz
spur reduction: -45dB
Carrier suppression: >40dB
Sideband spurious: >50dB
SSB frequency response: 400Hz-2800Hz (-6dB )
Microphone impedance: 200-10k(conventional 600Ω)
BAND : 1.0~55MHz Amateur band Built-in ATU MODE : SSB/CW/AM/FM
Power Supply : 9-15V DC RF Power: 5W
Company: XIEGU Technology Co., Ltd.
This device complies Part 15 of the FCC Rules. Operation is suited to the following two conditions:
(1) This device may not cause harrrful interference and
(2) This device mist accept ary interference received, including interference that may cause indesired operation
WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.
Download User Manual