X108G Outdoor Edition

| agosto 18, 2015

X108G Outdoor Edition

X108G QRP Transceiver

X108G Outdoor is X108’s upgraded version, It is a compact single conversion HF transceiver covering 0.5 to 30 MHz. Special optimized the Receive Channel, It has lower Background noise; and higher SNR, Up to 0.25uV&12dB;Equipped with a 2.3k SSB filter and a 500 Hz CW narrow-band filter, Excellent filtering characteristics.

It include a switchable AGC circuit, Large dynamic range. Other features include a preamplifier and signal attenuator, RIT control for SSB use, and RF output power variable from 1 to 20 Watts.

The front panel meter can display incoming signal strength, RF output power and VSWR, and the transceiver includes high VSWR protection circuitry to guard against potential damage to the output stage caused by antenna mismatching.

The RF output stage features imported RF MOS tubes and APC circuitry for constant output across all bands. A noise blanker (NB) module is available as an option, as is a high stability 0.5 ppm TCXO module. Its performance to meet the FCC (or CE) certification requirements.

X108G outdoor version equipped with a color OLED solid-state screen, Ignoring the strong outdoor sunlight irradiation, still clear. Has four full aluminum handle for better protect the machine.

X108G Outdoor X108G Outdoor rear


Receiver Features
Mixer Double balanced diode mixer for extended dynamic range
Filter Narrow band double tuned bandpass filters covering all HF amateur frequencies including WARC bands; Six element LPF
AGC IF channel AGC for constant gain;
preamplifier & signal attenuator Switchable preamplifier & signal attenuator
IF crystal filter High performance narrow band IF crystal filter with shape factor up to 1.7
VFO for operation Twin VFO for split operation
Parameters Table S-meter/RF Power/SWR via front panel display
NB The NB module can be added
Transmitter Features
Transmitter RF Output power adjustable between 1 & 20 Watts; Dedicated MOS RF power tube for superior performance; High VSWR protection circuitry for output stage; Inbuilt CW keyer with adjustable rate;
Receive frequency range 0.5~30MHz
Transmit frequency range All WARC bands (HAM band)
Working mode SSB(J3E); CW (A1A); AM (A3E);
Stray radiation rejection ≥40 dBc
Radio frequency output power 20W
Frequency stability 0.5 ppm @ Turned on Power is 5 minutes -10℃~+60℃
Spurious response rejection ≥40dBc
Working voltage 12V~14.5V DC;
Receiving standby current 600mA(max)
Emission current 7.5A (max)
Carrier suppression ≥45dBc
Receiver Dynamic Range Low noise, single conversion super heterodyne type;
Receiver sensitivity 0.5uV(PRE ON,≤2.0MHz) 0.3uV (PRE ON,>2.0MHz)
Antenna impedance 50Ω
Antenna connector SO239
Volume 120*45*180(mm)【Don’t Include handle and knob place】

 X108G multiband qrp transceiver


Firmware Update X108_FW_V1.35.1_Build0150

X108G Operating Manual V1.0A   
Outdoor Edition

X108 series driver (include X108G) 64 bit

About the Author:

Filed in: CHINA Radio

Comments are closed.