Wouxun KG-1000M

| junio 3, 2021

Wouxun KG-1000M Two way Radio – MURS radio

FCC PART 15B
MEASUREMENT AND TEST REPORT

For Quanzhou Wouxun Electronics Co., Ltd.

Wouxun KG-1000M – Product Description for Equipment under Test (EUT)

Applicant Quanzhou Wouxun Electronics Co., Ltd.
Test Model KG-1000M
Series Model
  • KG-1000M+
  • KG-1000M Plus
  • KG-1000MX
  • KG-1000MX+
  • KG-1000MX Plus
Model Difference See Declaration letter
Product Two way Radio ( MURS radio)
Rate Voltage DC 13.8V
Operating frequency range RX:50-54.995MHz, 65-108MHz, 108-180.995MHz , 320-349.995MHz, 400-479.995MHz, 700-824MHz , 849-869MHz, 894-960MHz
*Highest Operation Frequency 960 MHz

Note*: The highest operating frequency was provided by the applicant.

*All measurement and test data in this report was gathered from production sample serial number: RXM210322050-1. (Assigned by the BACL. The EUT supplied by the applicant was received on 2021-03-22)

Objective

This report is prepared on behalf of Quanzhou Wouxun Electronics Co., Ltd. in accordance with Part 2-Subpart J, and Part 15-Subparts A and B of the Federal Communication Commission’s rules.

The objective of the manufacturer is to determine the compliance of EUT with FCC Part 15, Class B device.
Related Submittal(s)/Grant(s)

Wouxun KG-1000M

FCC Part 95 TNB Submittal with FCC ID: WVTWOUXUN24 Test Methodology

All measurements contained in this report were conducted with ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz.


All radiated and conducted emissions measurement was performed at Bay Area Compliance Laboratories Corp. (Kunshan). The radiated testing was performed at an antenna-to-EUT distance of 3 meters.

Test Facility

The test site used by Bay Area Compliance Laboratories Corp. (Kunshan) to collect test data is located on the No.248 Chenghu Road, Kunshan, Jiangsu province, China.

Bay Area Compliance Laboratories Corp. (Kunshan) Lab is accredited to ISO/IEC 17025 by A2LA (Lab code: 4323.01) and the FCC designation No. CN1185 under the FCC KDB 974614 D01 and CAB identifier CN0004 under the ISED requirement. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-2014.

SYSTEM TEST CONFIGURATION
Justification

The system was configured for testing in a typical fashion (as normally used by a typical user).

  • Test mode 1: Scan receiver mode
  • Test Mode 2: Receive at 50MHz
  • Test Mode 3: Receive at 52MHz
  • Test Mode 4: Receive at 54MHz
  • Test Mode 5: Receive at 65MHz
  • Test Mode 6: Receive at 86MHz
  • Test Mode 7: Receive at 108MHz
  • Test Mode 8: Receive at 144MHz
  • Test Mode 9: Receive at 180MHz
  • Test Mode 10: Receive at 320MHz
  • Test Mode 11: Receive at 335MHz
  • Test Mode 12: Receive at 349MHz
  • Test Mode 13: Receive at 400MHz
  • Test Mode 14: Receive at 440MHz
  • Test Mode 15: Receive at 479MHz
  • Test Mode 16: Receive at 700MHz
  • Test Mode 17: Receive at 762MHz
  • Test Mode 18: Receive at 824MHz
  • Test Mode 19: Receive at 849MHz
  • Test Mode 20: Receive at 859MHz
  • Test Mode 21: Receive at 869MHz
  • Test Mode 22: Receive at 894MHz
  • Test Mode 23: Receive at 927MHz
  • Test Mode 24: Receive at 960MHz

EUT Exercise Software

No exercise software.

Special Accessories

No special accessory was used.

Equipment Modifications

No modification was made to the EUT tested.

About the Author:

Filed in: CHINA Radio
×

Comments are closed.