Icom IC-M510

| mayo 1, 2021

Icom IC-M510 VHF Marine Transceiver

Icom IC-M510: FCC ID: AFJ419500 – IC:202D-419500

Applicant: ICOM Incorporated

Icom IC-M510 EQUIPMENT UNDER TEST (EUT) INFORMATION

The following information (with the exception of the Date of Receipt) has been supplied by the applicant.

Brand Name: ICOM Incorporated
Product Name: VHF Marine Transceiver
Model Name or Number: IC-M510
Serial Number: 00000013
Type of Equipment: Licensed Non-Broadcast Transmitter
Power Supply Requirement: 13.8 V DC
Transmitting/Receiving Antenna Type: Non-integral
Primary User Functions of EUT: VHF Marine Transceiver for Ship Station

Icom IC-M510 EUT’S TECHNICAL SPECIFICATIONS

Transmitter

Equipment Type: Mobile
Intended Operating Environment: Marine
Power Supply Requirement: 13.8 V DC
RF Output Power Rating: 25 Watts (High) and 1 Watt (Low)
Operating Frequency Range:
  • 156.025-157.425 MHz (Marine),
  • 156.525 MHz (DSC)
RF Output Impedance: 50 Ohm
Channel Spacing: 25 kHz
Modulation Employed: Variable reactance FM (frequency modulation)
Occupied Bandwidth (99%): 15.03 kHz, 12.79 kHz (DSC)
Emission Designation*: FM (16K0G3E) DSC (16K0G2B)
Antenna Connector Type: UHF

*For an average case of commercial telephony, the Necessary Bandwidth is calculated as follows:

Channel Spacing = 25 KHz, D = 5 KHz max, K = 1, M = 3 KHz Bn = 2M + 2DK = 2(3) + 2(5)(1) = 16 kHz Emission designation: 16K0G3E

Receiver

Operating Frequency Range: 156.050-163.275 MHz
Intermediate Frequencies: 30.15 MHz , 21.7 MHz

LIST OF EUT’S PORTS

Port

Number

EUT’s Port Description Number of Identical Ports Connector Type
1 Antenna Connector 1 PL-259
2 NMEA IN/OUT 1 Leads
3 AF OUT bundle 1 Leads
4 DC Power 1 Leads(pair)
5 Ground terminal 1 Lead
6 GNSS receiver connector 1 SMA
7 Microphone Connector 2 8 pin
8 Command Mic 1 8 pin
Description: GNSS Antenna
Brand Name: ICOM
Model Name or Number: UX-241
Description: Microphone
Brand Name: ICOM
Model Name or Number: HM-205RB
Description: Microphone
Brand Name: ICOM
Model Name or Number: HM-195SW
Description: External Terminal Interface Box (Connected via wifi)
Brand Name: ICOM
Model Name or Number: CT-M500

Transmitter Test Signals

Frequency Band(s): 156.025-157.425 MHz
Test Frequency(ies): 156.050and 157.425 MHz, 156.525 MHz (DSC)

Transmitter Wanted Output Test Signals:


Transmitter Power (rated output power): Normal Test Modulation:

Modulating signal source:

25 Watts High, 1 Watt Low

Variable reactance frequency modulation

External

MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES

None

DEVIATION OF STANDARD TEST PROCEDURES

None

Serial Number Sticker

IC-M510

icom IC-M510
IC-M510 AIS

icom IC-M510 AIS

CT-M500 Interface box for NMEA2000, PA and hailer with RX speaker

icom CT-M500

icom UX-241 External GPS antenna supplied with 5m cable

 icom UX-241 External GPS antenna

©ICOM Incorporated

About the Author:

Filed in: Hamradio
×

Comments are closed.