Icom AP-95M

| diciembre 29, 2018

Icom AP-95M

WIRELESS ACCESS POINT

IEEE802.11ac Wave 2 standard

FCC Test Report

  • Report No.: RF161004C24L-1
  • Test Model: AP-95M
  • Received Date: 14, 2018
  • Test Date: 25 ~ Oct. 08, 2018
  • Issued Date: 26, 2018
  • Applicant: Icom Inc.

Product: Wireless 802.11 abgn/ac indoor AP

Standards: 47 CFR FCC Part 15, Subpart E (Section 15.407) ANSI C63.10:2013

General Description of EUT

Product Wireless 802.11 abgn/ac indoor AP
Brand ICOM
Test Model AP-95M
Sample Status Engineering sample
Power Supply Rating 12Vdc from adapter
54Vdc from POE
Modulation Type 256QAM, 64QAM, 16QAM, QPSK, BPSK
Modulation Technology OFDM
Transfer Rate
  • 802.11a: 54/48/36/24/1/1/9/6Mbps
  • 802.11 n: up to 300Mbps
  • 802.11 ac: up to 867Mbps
Operating Frequency 5180 ~ 5240MHz, 5745 ~ 5825MHz
Number of Channel 5180 ~ 5240MHz:

802.11a, 802.11n (HT20), 802.11ac (VHT20): 4
802.11n (HT40), 802.11ac (VHT40): 2
802.11ac (VHT80): 1
5745 ~ 5825MHz:

802.11a, 802.11n (HT20), 802.11ac (VHT20): 5
802.11n (HT40), 802.11ac (VHT40): 2
802.11ac (VHT80): 1

Output Power CDD Mode:

5180 ~ 5240MHz: 381.750mW
5745 ~ 5825MHz: 605.215mW
Beamforming Mode:

5180 ~ 5240MHz: 190.888mW
5745 ~ 5825MHz: 302.629mW

  1. The EUT incorporates a MIMO function. Physically, the EUT provides 2 completed transmitters and 2
Modulation Mode TX Function Beamforming
802.11a 2TX Not Support
802.11n (HT20) 2TX Support
802.11n (HT40) 2TX Support
802.11ac (VHT20) 2TX Support
802.11ac (VHT40) 2TX Support
802.11ac (VHT80) 2TX Support

* For 5GHz band, CDD mode is the worst case for final tests except RF output power test after pretesting
CDD mode and beamforming mode.

*The modulation and bandwidth are similar for 802.11n mode for HT20/HT40 and 802.11ac mode for
VHT20/VHT40, therefore investigated worst case to representative mode in test report. (Final test mode
refer section 3.2.1)

  1. The EUT uses following antennas.
Antenna Type: Printed Antenna Connector: IPEX
Frequency (MHz)
2400-2500 5150-5850
Internal Ant. 1 4.4 dBi
Internal Ant. 2 4.5 dBi
Internal Ant. 3 5.6 dBi
Internal Ant. 4 5.6 dBi
  1. The EUT uses following adapter and POE.
Adapter
Brand Asian Power Devices Inc.
Model WA-24Q12FU
Input Power 100-240Vac, 50-60Hz, 0.7A Max
Output Power 12Vdc, 2A
Power Line 1.45m non-shielded DC cable without core attached on adapter
POE (Support unit only)
Brand icom
Model SA-5
Input Power 100-240Vac, 50-60Hz, 0.8A
Output Power 54Vdc, 0.6A
  1. 4GHz and 5GHz technology can transmit at same time.
  2. Spurious emission of the simultaneous operation (2.4GHz and 5GHz) has been evaluated and no
    non-compliance was found.

IEEE802.11ac (Wave 2) compliant compact access point

AP-95M conforms to IEEE 802.11 ac (Wave 2). It is a compact access point that supports high-speed communication with a theoretical value of 867 Mbps, beamforming / MU-MIMO function. In addition, up to 16 groups can be set with 5-GHz / 2.4 GHz simultaneous two-wire communication, virtual AP, VLAN function, and the communication function between APs is installed to support expansion of communication area.


High speed communication with IEEE802.11ac compliant theoretical value 867 Mbps

In compliance with IEEE 802. 11ac (Wave 2), stable data communication with ultra high speed of up to 867 Mbps (theoretical value) is possible.

Beam forming / MU-MIMO function

Beam forming function for sending radio waves to specific terminals, MU-MIMO function in addition, in addition, comfortable access from the terminal is realized.

VLAN support (virtual AP)

You can configure up to 8 groups of 2.4 GHz band / 5 GHz band wireless LAN terminal group with different VLAN ID and SSID. It is also possible to set different encryption keys for each group.

Easy radio setting

Equipped with power level adjustment function and connection terminal restriction function to suppress communication speed reduction due to mutual interference and concentration of connected terminals. In addition, it has an automatic channel setting function that automatically sets the channel according to the surrounding radio conditions.

Easy setting from PC

Various settings such as firmware version upgrade and data initialization can be completed from the PC using the web browser. In addition to being compatible with SNMP, it is compatible with the access point management tool RS – AP3, so you can easily manage the device.

«00000JAPAN» correspondence

It corresponds to «00000JAPAN» (Five Zero Japan), which telecommunications carriers open free access points for public wireless LANs so that victims can connect to the Internet in the event of a disaster.

Other features

  • Protection function
  • High level security function (IEEE 802.1X / WPA / WPA 2)
  • Group communication function (ANY reject function)
  • Gigabit Ethernet compatible
  • Broadband router function * (Routing is for wireless terminals only)
  • Web authentication function
  • Network monitoring function
  • Packet filter function
  • POPCHAT @ cloud support
  • Anti-theft security slot compatible
  • PoE function etc.

* Coming soon

accessories

  • AC adapter
  • Mounting bracket etc.

Wireless LAN section

Security WEP (64/128/152 bit), WPA, WPA 2, WPA – PSK, WPA 2 – PSK, IEEE 802.1 X / EAP
Number of channels
20 MHz bandwidth:
2.4 GHz band 13 channels
5 GHz band 19 channels
40 MHz bandwidth: 2.4 GHz band 9 channels
5 GHz band 9 channels
80 MHz bandwidth: 5 GHz band 16 channels

interface

Wired LAN interface 10BASE-T / 100BASE-TX / 1000BASE-T compatible

RJ – 45 type connector (MDI / MDI – X automatic discrimination) × 1

Wireless LAN interface IEEE802.11ac / n / a / g / b standard
Communication speed (theoretical value) Wired LAN section: 10/100/1000 Mbps

Wireless LAN section: 11/54/400 * / 867 Mbps

* When communicating with a 256 QAM compatible terminal

General specification

Power supply AC adapter AC 100 V ± 10% 50/60 Hz Maximum 9 W

PoE (IEEE 802.3af compliant: maximum 9 W)

Operating environment -10 ° C to + 55 ° C (when energized below 0 ° C)

5 to 95% RH (with no condensation)

External dimensions Approximately 162 mm (W) x 162 mm (D) x 42 mm (H) (excluding protrusions)
weight About 520 g (body only)

 

· Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
· IEEE802.11a (J52, W52, W53) is limited to indoor use by the Radio Law.

W56 can be used outdoors.

· Ratings, specifications, appearance etc. are subject to change without prior notice for improvement.
· The communication distance described may vary depending on the communication environment.
· Since the described communication speed is the theoretical maximum value, the effective speed varies depending on the communication environment.

Download
Icom AP-95M CONNECTION GUIDE

About the Author:

Filed in: NEWS
×

Comments are closed.