IC-FR5300

| marzo 6, 2020

VHF DIGITAL REPEATER
Model No.: IC-FR5300/ UR-FR5300

Applicant:

ICOM Incorporated

1-1-32, Kamiminami, Hirano-ku
Osaka, Japan, 547-0003

Tested in Accordance With:

Federal Communications Commission (FCC)

47 CFR, Parts 2, 22, 74, 80 and 90 (Subpart I)
And Industry Canada, RSS-119, Issue 12
Land Mobile and Fixed Transmitters and Receivers
Operating in the Frequency Range 27.41-960 MHz

IC-FR5300 VHF Digital Repeater

EQUIPMENT UNDER TEST (EUT) INFORMATION

The applicant has supplied the following information (with the exception of the Date of Receipt).

Brand Name: ICOM Incorporated
Product Name: VHF DIGITAL REPEATER
Model Name or Number: IC-FR5300
Serial Number: 00000102
Type of Equipment: Licensed Non-Broadcast Station Transmitter
Power Supply Requirement: 13.6 VDC nominal
Transmitting/Receiving Antenna Type: Non-integral
Primary User Functions of EUT: 2-Way Wireless Voice & Data repeater

 

EUT TECHNICAL SPECIFICATIONS

TRANSMITTER
Equipment Type: Mobile
Intended Operating Environment: Restricted to Occupational Use only
Power Supply Requirement: 13.6 VDC Nominal
RF Output Power Rating: 50 Watt (High) / 5 Watt (Low)
Operating Frequency Range: 136-174 MHz
RF Output Impedance: 50 Ohm.
Channel Spacing: 25 kHz, 12.5kHz,15 kHz, 6.25 kHz
Occupied Bandwidth (99%): 16.66 kHz (25 kHz Analog)
10.48 kHz (12.5 kHz Analog),
3.86 kHz (6.25 kHz Digital)
Emission Designation*: 16K0F3E**, 11K0F3E, 4K00F1E, 4K00F1D
Antenna Connector Type: N

 

* For an average case of commercial telephony, the Necessary Bandwidth is calculated as follows:


For FM Voice Modulation:

Channel Spacing = 25 KHz, D = 5 KHz max, K = 1, M = 3 KHz
Bn = 2M + 2DK = 2(3) + 2(5)(1) = 16 KHz
Emission designation: 16K0F3E

Channel Spacing = 12.5 KHz, D = 2.5 KHz max, K = 1, M = 3 KHz
Bn = 2M + 2DK = 2(3) + 2(2.5)(1) = 11 KHz
Emission designation: 11K0F3E

 

**Note: The emission designation 16K0F3E with 25 KHz Channel bandwidth is only applied to the device operated in FCC Rules Part 22, 74 & 80 frequencies. The operation of 16K0F3E emission will be disabled in the firmware by the manufacturer for device that operates in FCC Rules Part 90 frequencies (Private Land Mobile) as declared by the applicant.

 

LIST OF EUT’S PORTS

Port

Number

EUT’s Port Description Number of Identical Ports Cable Type/Termination
1 Tx Antenna Connector 1 Terminated to 500 Load
2 Microphone Jack 1 Non-shielded
3 DC Power Receptacle 1 Non-shielded
4 Rx Antenna Connector 1 Terminated to 50Ω Load
5 DC Fan Input Power Receptacle 1 Non-shielded
6 DB25 1 Shielded
7 Bus1/2 RJ45 2 Non-shielded
8 LAN 1 Non-shielded
9 Ext Speaker Jack 1 Non-shielded
10 GPS Antenna 1 GPS Antenna

 

EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS

Transmitter Test Signals
Frequency Band: 136-174 MHz

Test Frequencies:

(Near lowest, near middle & near highest frequencies in the frequency range of operation.)

138.1 MHz, 151.1 MHz, 160.9 MHz, 173.3 MHz
Transmitter Wanted Output Test Signals:
Transmitter Power (measured maximum output power): 48.42 W High
Normal Test Modulation: FM Voice/Digital
Modulating signal source: External

About the Author:

Filed in: Hamradio

Comments are closed.

error: