BF-F9 V2+ FCC Certification
BF-F9 V2+ FCC Certification
FCC TEST REPORT
Dual Band FM Transceiver
Model No.: BF-F9 V2+
Date of Test
- Date (s) of performance of tests…………….. : Sept. 29, 2018~Oct. 17, 2018
- Date of Issue………………………………………. : Nov. 30, 2018
- Test Result: Pass
TEST RESULT CERTIFICATION
- Manufacture’s Name : POFUNG ELECTRONIC
- Product description: Dual Band FM Transceiver
- Brand Name: BAOFENG
- Model Name: BF-F9 V2+
- Standards: FCC Rules and Regulations Part 15B
VERIFICATION OF COMPLIANCE
Hardware Version | 5R-VER20 160113 |
Software Version | BFS001 |
Measurement Procedure | ANSI C63.4: 2014 |
Deviation: | None |
Condition of Test Sample | Normal |
PRODUCT INFORMATION
The EUT is a Analog Transceiver designed for voice communication. It is designed by way of utilizing the F3E modulation achieves the system operating.
A major technical description of eUt is described as following:
Communication Type | Voice / Tone only |
Modulation | FM |
RX Frequency Range | Rx: 136 MHz -174 MHz, 400MHz -520MHz |
Emission Type | F3E |
Antenna Designation | Detachable |
Antenna Gain | 2.15dBi |
Power Supply | DC 7.4V 1800mAh, charging with DC 8.4V. |
Adapter Parameter | INPUT:AC 100-240V~ 50/60Hz ,0.2A OUTPUT:DC 10V 0.5A |
Charger Parameter | INPUT: DC 10V 0.5A OUTPUT:DC 8.4V 0.4A |
Date: 16 November 2018
Federal Communication Commission Authorization and Evaluation Division
Model No.: BF-F9 V2+
Subject: Declaration of compliance to the requirements of §15.121
We declare that, this scanning receiver is incapable of operating (tuning), or readily being altered by the users to operate, within the frequency bands allocated to the Cellular Radiotelephone Service in part 22 of this chapter (cellular telephone bands).
This device will not be able to receive transmissions in the cellular telephone bands by means of clipping the leads of, or installing, a simple component such as a diode, resistor or jumper wire; replacing a plug-in semiconductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer.
This device is also incapable of converting digital cellular communication transmissions to analog voice audio.
This device is designed so that the tuning, control and filtering circuitry is inaccessible.
Any attempts to modify the equipment to receive transmissions from the Cellular Radiotelephone Service will render the receiver inoperable.
This scanning receiver rejects any signals from the Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement.
We are aware that the modification of this device to receive transmissions from Cellular Radiotelephone Service frequency bands will be considered to constitute manufacture of such equipment. This includes any individual, individuals, entity or organization that modifies one or more scanners. Any modification to receive transmissions from the Cellular Radiotelephone Service frequency bands voids the certification of the scanning receiver, regardless of the date of manufacture of the original unit.
If you have any questions, please feel free to contact me.
Thank you.
Sincerely,
FCC Photos
Manufacture Specifications
GENERAL:
Frequency range: |
|
Memory channels: | Up to 128 channels |
Frequency stability: | 2.5ppm. |
Frequency step: | 2.5kHz/5kHz/6.25kHz/10kHz/12.5kHz/25kHz |
Antenna impedance: | 50 Ohm. |
Operating temperature: | -20 ° C to +60 ° C. |
Supply voltage: Consumption in standby: | Rechargeable Lithium-Ion mAh 7.4V/1800. |
Consumption in reception: | 380mA |
Consumption in transmission: | <1.4 A. |
Mode of operation: | Simplex or semi-duplex. |
Duty cycle: | 03/33/54 min. (Rx / Tx / Standby). |
Dimensions: | 58mm x 110mm x 32mm |
Weight: | 130 g (approximate). |
TRANSMITTER:
RF power: | 7W/4W/1W. |
Type of modulation: | FM. |
Emission class: | 16KOF3E/11KOF3E (W/N). |
Maximum deviation: | <±5 kHz/<±2.5 kHz (W/N). |
Spurious emissions: | <-60 dB. |
RECEIVER:
Receiver sensitivity: | 0.2 M V(at 12 dB SINAD). |
Intermodulation: | 60 dB. |
Download BF-F9 V2+ User Manual