Anytone AT-D578UVIII Plus v2

| julio 26, 2021
  • FCC ID: T4K-D578UV2
  • PRODUCT DESIGNATION: DMR DIGITAL AND ANALOG MOBILE RADIO
  • BRAND NAME: AnyTone
  • STANDARD(S): FCC Part 15 Rules

Anytone AT-D578UVIII Plus v2 VERIFICATION OF COMPLIANCE

Manufacturer: Qixiang Electron Science & Technology Co., Ltd.
Product Designation: DMR DIGITAL AND ANALOG MOBILE RADIO
Brand Name: AnyTone
Test Model AT-D578UVIII PLUS V2
Series Model AT-D578UV PLUS, AT-D578III PLUS V2, AT-D578UV PLUS V2, AT-D578UVIII V2, AT-D578UVIII PLUS
Difference Description All the same except for the model name
Measurement Procedure: ANSI C63.4: 2014
Deviation: No any deviation from the test method.
Date of Test: May 24, 2021~Jul. 09, 2021
Condition of Test Sample: Normal
Test Result: Pass

The above equipment was tested by Attestation Of Global Compliance (Shenzhen) Co., Ltd. for compliance with
the requirements set forth in the FCC Rules and Regulations Part 15, the measurement procedure according to
ANSI C63.4:2014.

This said equipment in the configuration described in this report shows the maximum emission levels emanating from equipment are within the compliance requirements. The test results of this report relate only to the tested sample identified in this report.

Anytone AT-D578UVIII Plus v2 PRODUCT INFORMATION

The EUT is a DMR DIGITAL AND ANALOG MOBILE RADIO designed for voice communication. It is designed by way of utilizing the F3E modulation achieves the system operating.

A major technical description of EUT is described as following:

Communication Type Voice / Tone only
Modulation AM
RX Frequency Range 108-137MHz (AM Receiver), 1575.42 MHz (GPS Receiver)
Emission Type A3E
Antenna Designation Detachable Antenna
Antenna Type External Antenna
Antenna Gain GPS: 29dBi
Hardware Version V3.2
Software Version V2
Power Supply DC 13.8V

SUMMARY OF TEST RESULTS

FCC RULES DESCRIPTION OF TEST RESULT
§15.107 Conduction Emission Not applicable.
§15.109 Radiated Emission Compliant

NOTE: The device under test is a DC power supply device, and the conducted disturbance test is not applicable.

Subject: Explanation of differences between product types

FCC ID : T4K-D578UV2
Model Number: AT-D578UVIII PLUS V2, AT-D578UV PLUS, AT-D578III PLUS V2, AT-D578UV PLUS V2, AT-D578UVIII V2, AT-D578UVIII PLUS

To Whom It May Concern:
We, The Qixiang Electron Science & Technology Co., Ltd. hereby declare that the
models are identical except the model name.

Except for the different above, no other modification is performed.

AT-D578UVIII PLUS

This radio offers both DMR digital and analog communication, introduces innovative DMR digital processing system. It offers great stability, and reliability, together with long distance communication as well as fashionable design and compact exterior lines.

AT-D578UV has Text Messaging, Recording, Voice Message, AES256 Digital Encryption, Emergency Alarm, Man Down Alarm, Work Alone, GPS, APRS Location Reporting, Roaming, Cross band repeater, Bluetooth, Analog DTMF, 2TONE, 5TONE, CTCSS/DCS encode/decode functions.

PROGRAMMING GUIDE

Anytone AT-D578UV radios ship from the manufacturer “Keypad” locked per FCC rules. You can press the [MENU] key and the [*] key to unlock the keypad for the first time of use. You will need the programming cable to connect your radio to your computer for programming.

The programming software and codeplug programming guide are available for download from Anytone website: http://www.anytone.net/download.html

When programming this radio for the first time, it is recommended you first READ the radio with the software and then save this file for future reference as it contains the default programming and settings. In addition, after you READ this radio with software, first make your programming and frequency changes, then send this edited file back to your radio.

Multiple Radio ID’s

The AT-D578UV radio will allow multiple DMR Radio ID numbers to be used with the radio. This feature will allow one radio to be used for example as a Commercial Radio with its own DMR ID, and at the same time also be used as an Amateur radio with another DMR ID.

In PC software, Digital/Radio ID List, you can enter your Department Unit Number or Amateur Radio callsign.

Amateur DMR-MARC

For the best Amateur DMR experience obtain a subscriber ID from one of many available


Amateur Radio sources. A U.S. Amateur can obtain a DMR ID From:

https://www.radioid.net/cgi-bin/trbo-database/register.cgi

For DMR repeaters in your area please see: www.repeaterbook.com

World DMR repeater network map:

https://www.repeaterbook.com/index.php/repeater-database World DMR repeater network with verified Talkgroups by activity: https://brandmeister.network/?page=lh

Worldwide Amateur Contact Database

The AT-D578UV DMR radios contain a separate database memory for importing and displaying Amateur DMR individual IDs, call sign and user name in comma-delimited format (.csv)

Please reference in the programming guide for import and export database operations detailed.

User List Contact Database: https://ham-digital.org/status/

Anytone AT-D578UVIII Plus RESET

A. Power off the radio.

B. Then power it on while holding the [P2] and the channel switch at the same time.

C. The radio will start up with a note on the display – «Are you sure you want to initialize radio?»

Press Exit to exit the reset and power on the radio.

Press Confirm to proceed the reset, it will come with a screen display

note – Initialize Radio.

D. After a re-start the radio will display the setting of time zone and the date and the time. Use the channel switch to set the current year. Move to the month by pushing the channel switch. Set the month, and use the channel switch key to move forward each step. Once done, click the Confirm key to save the date and time.

Please remember set up the time zone to avoid the date/time error.

Make sure the codeplug is saved to PC before your do the update and reset.

Download Anytone AT-D578UVIII Plus User Manual

About the Author:

Filed in: CHINA Radio
×

Comments are closed.