IC-7300 Firmware Update

IC-7300 Firmware Update

Version Version 1.30
Update 2018/07/20
Major changes Changes in this version

  • A SET MODE item is added to expand the transmission passband width for the SSB data mode up to “100 to 2900 Hz”.
  • A SET MODE item is added to make the USB SEND/USB Keying function active immediately after USB port connection. The Menu structure is changed accordingly.

Refer to IC-7300 Firmware Update Information Ver.1.30 for more details.

To update the firmware

  • Thoroughly read Section 8. USING AN SD CARD and Section 15.
    UPDATING THE FIRMWARE of the FULL MANUAL and follow the instructions displayed on the IC-7300 LCD screen.
  • The firmware will be updated to the following versions.
    Main CPU: 1.30
    DSP Program: 1.07
    DSP Data: 1.00
    FPGA: 1.13
Note
File Size 2.69MB
File Type ZIP
Manual manual download page

 

Support Firmware / Software IC-7300

Type Model Name Version last update
Control software RS-BA1 Version 1.92 2016/02/05
Control software RS-BA1 Version 1.95 2017/11/30
Firmware IC-7300 Version 1.12 2016/04/14
Firmware IC-7300 Version 1.13 2016/05/27
Firmware IC-7300 Version 1.14 2016/10/05
Firmware IC-7300 Version 1.20 2017/11/30
Firmware IC-7300 Version 1.21 2018/02/27
Firmware IC-7300 Version 1.30 2018/07/20
USB Driver IC-7300 Version 1.20 2017/10/05
USB Driver IC-7300 Version 1.30 2018/06/07
It's only fair to share...Tweet about this on Twitter
Twitter
Share on Facebook
Facebook
Share on Reddit
Reddit
Share on LinkedIn
Linkedin