Programmable Talkback Feature
Alpha 10 Max – Model AM-1000
Programming the AM-1000 TalkBack Feature (Rev 3.0A Up)
* Press and Hold the FUNC Button for two seconds to enter Programming Mode.
* Press the FUNC Button repeatedly until “TES” or “TNS” appears on the LCD Display.
* Use the Clarifier Control to set these two functions to a On/Off state.
When TES is On, and ECHO is On, The user can hear his voice through the speaker to properly set the Echo Function. When ECHO is OFF, the Talkback feature will not work in other modes. Use the Clarifier Control to set this feature On/Off.
When TNS is On, and ECHO is Off, The user can hear his voice through the speaker. The Talkback feature will work on All Modes to check proper operation and control levels. Use the Clarifier Control to set this feature On/Off.
This feature is only available in newer Alpha 10 Max Model AM-1000 (Firmware revision v3.0A up) When entering the programming mode, press the FUNC Button repeatedly until display shows the TNS or TES Functions. If these settings are not shown on the display, your firmware version cannot use this option.
Copyright (C) 2011 – www.alpha10radios.com