Yaesu FT-70DR Modification

| julio 2, 2017

Yaesu FT-70DR Modification

Easy mod just remove rubber plug on back and remove chip resistor circled in picture and your good for

140-174 and 420-470 MHz

Yaesu FT-70DR Modification

Related Posts

  • FT2D Yaesu ModFT2D Yaesu Mod Yaesu FT-2D and FT-2DR Mars Cap Modification Remove battery pack and locate rubber gasket on back of the radio and remove. Then locate chip resistor marked […]
  • Yaesu FTM-100 MARS/CAP modYaesu FTM-100 MARS/CAP mod In order to expand the frequency coverage (RX and TX) you need to remove R1850 on the european model. R1850 is located near the paper covered “UPDATE” […]
  • FT-891 MARS modificationFT-891 MARS modification This modification gives the FT-891 a continuous TX range of 1.8 - 56 MHz. Open the top of the radio up the spealer and near to dsp you ca see 2 slot, solder […]
  • FTdx3000 MOD MARS/CAPFTdx3000 MOD MARS/CAP The jumpers are called JP3001 until JP3009, in my radio I have the jumpers JP3006 and JP3007 closed, 0 ohms.I do the jumper JP3005 and reset the radio, now it is […]
  • FT-991 MARS ModFT-991 MARS Mod Yaesu FT-991 Frequency Expansion Information Confidential Model: FT-991 Original TX Freq. Range: 160-6m Amateur Bands Date: 15 December 2014 New TX Freq. […]
  • FTdx1200 MOD MARS/CAPFTdx1200 MOD MARS/CAP Disconnect the radio from all power, accessories, and antennas prior to attempting this modification. Use a grounded low power thermo control soldering […]

About the Author:

Filed in: Hamradio
×

Comments are closed.

error: