UV-82 CIRCUIT DESCRIPTION

| septiembre 22, 2013

BAOFENG UV-82 CIRCUIT DESCRIPTION

BAOFENG UV-82 CIRCUIT DESCRIPTION

UV-82 consists of RF IC, RF Receive Amplifier, RF Transmit Amplifier, AF Amplifier, FM Radio IC, MCU Circuit and LCD.

uv-82 baofeng block diagram

1. RF IC

RF IC actually is a semiduplex FM transceiver which designed to operate in the frequency range: 136-174MHz and 400-520 MHz. The RF IC is of advanced digital signal processing ability, integrating PLL, ADC/DAC and all RF T/R path circuit. It can transmit and receive the signal with few components.

2. RF Receive Amplifier

1) Receive in the frequency range: 136-174MHz

A coming signal from the antenna is applied to an RF amplifier (Q11) after passing through a transmit/receive switch circuit and LC band pass filter. After the signal is amplified, it enters RF IC.

2) Receive in the frequency range: 400-520MHz

A coming signal from the antenna is applied to an RF amplifier (Q10) after passing through a transmit/receive switch circuit and LC band pass filter. After the signal is amplified, it enters RF IC.

uv-82 baofeng circuit

3. RF Transmit Amplifier

1) Transmit in the frequency range: 136-174MHz

The sound signal enters RF IC from MIC1, it would be filtered, amplified and direct modulated, then at the output port of the RF IC will obtain 136-174MHz RF signal. The signal will be input in the RF AMP (Q1) after amplified by RF AMP (Q3), then it is passed to antenna terminal through RF PA (Q5).

2) Transmit in the frequency range: 400-520MHz

The sound signal enters RF IC from MIC1, it would be filtered, amplified and direct modulated, then at the output port of the RF IC will obtain 400-480MHz RF signal. The signal will be input in the RF AMP (Q1) after amplified by RF AMP (Q3), then it is passed to antenna terminal through RF PA (Q5).

4. AF Amplifier

The RF signal is converted to the first intermediate frequency through the low noise amplifier within the RF IC, then amplified and D/A converted to the digital signal, then passed to the digital frequency discriminator for demodulation. The result signal is sent to the speaker through the audio AMP (U4).

5. FM Radio IC

FM radio signal comes from the antenna, the signal amplified by the HF amplifier (Q12) and enters into the FM IC which demodulates output the AF signal. Then the result signal is sent to the speaker through the audio AMP.

uv-82 baofeng circuit

6. MCU Circuit and LCD

The 8 bit MCU (U6) controls the transmit/receive of whole circuit and all functions. And the LCD displays all relevant message.

Related Posts

  • baofeng uv-82 reviewBaofeng UV-82 Dual Band walkie talkie FEATURES AND FUNCTIONS Dual-band handheld transceiver with display function menu on the display "LCD". Commercial FM radio receiver (65 MHz - […]
  • UV-82 tune up procedureBaofeng UV-82 tune up procedure 1. Adjust the frequency Turn the adjustable resistance"VR1" to make the frequency range within the nominal frequency ± 100Hz 2. Adjust the output […]
  • Baofeng Discontinued Models 2015Baofeng Discontinued Models 2015 Discontinued Models 2015 BaoFeng UV-5R (AKA UV-5R V2+) BaoFeng UV-5Rv2+ BaoFeng UV-3R and […]
  • BaoFeng BF-F8HPBaoFeng BF-F8HP Tri-Power 1/4/8W CHIRP compatible 2nd Generation Chipset This is the same chipset that is currently used in the GT-3. The new chipset (RDA1846S and RDA5802N) […]
  • Baofeng GT-3Baofeng GT-3 Dual Band UHF/VHF 136-174/400-480MHz - 5W TX  - FM radio reception This is the 2014 latest Baofeng two way radio with human-oriented features. Large capacity Li-ion […]
  • baofeng BF-F9V2+baofeng BF-F9V2+ The BF-F9 V2+ is the next level of ham radio, improving on the top of the line UV-5R V2+ model with the new addition of Tri-Power functionality: This includes unsurpassed […]
It's only fair to share...Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedInShare on Reddit

About the Author:

Filed in: CHINA Radio
×

Comments are closed.

error: