DR-B185HT DR-B185HE MARS/CAP mod

| diciembre 1, 2016

DR-B185HT DR-B185HE MARS/CAP mod

DR-B185HT DR-B185HE – Alinco
Frequency Expansion MARS/CAP mod

Original Frequency Range
DR-B185HE: 144 – 145.995 MHz
DR-B185HT: 144 – 147.995 MHz  (136-173.995MHz RX only)

MOD frequency range TX/RX 136-174mHz

  • Turn off the power.  Remove power cable for safety.
  • Open the top cover.  Located the blue loop of wire at the left corner near the front panel.
  • Cut in the middle and use shrink tube to isolate the ends.  Replace the cover.
  • Turn on with the CAL and the FUNC bottom depressed at the same time to reset the radio.  Any memory you have installed is lost and you have to start over.
  • The modification frequency range is TX/RX 136-174mHz.
dr-b185_mod_frequency_expansion
DR-B185 Instruction Manual
DEFAULT SETTING AFTER RESETTING

resetting_dr-b185

Optional functions will be basically deactivated and programmed values are erased.

TO RESET

Perform the reset to resume default setting, 2 reset modes are available.

SYSTEM reset


Resumes default setting without erasing memory channel data.

Turn off. Turn on with «FUNC» key pressed. All LCD segments will be displayed. Release the key and wait until 145.000 is displayed.

ALL reset

Resumes default setting and clears the memory data. The deleted memory data can’t be recalled.

Turn off. Turn on with «FUNC» and «CALL» keys pressed together.

All LCD segments will be displayed. Release keys and wait until 145.000 is displayed.

NOTE

Reset is not available in Channel display mode, or preprogrammed using PC utility software.

About the Author:

Filed in: Hamradio
×

Comments are closed.

error: